Busbar Insulation Protection Tubing(HBM/HBT)

Applications/Features

HBM/HBT is made from apecially formulated radiation crosslinked
polyolefin
halogen free compounds. Thus carefully produced can
provide high
resistance to tracking and arcing.Used to enhance
the insulation.Properties of
busbar in switchgear and substation.
The continuous length of supplied products 
makes it to be used
more conveniently and economically.

Shrink ratio: 2:1
Minimum shrink Temperature: 110°C


Specification
Values

Properties

Typical value

Test method

Tensile strength

>=11.8Mpa

ASTM D 638

Tensile strength after aging

120°C 168hrs,>=10Pa

ISO 188

Elongation at break

700%

ASTM D 638

Elongaton at break after aging

120°C 168hrs,>=500%

ISO 188

Dielectric strength

>=20KV/mm

IEC 243

Dielectric constant

4.0

IEC 250

Volume resistance

1013 .cm

IEC 93

Flammability

Q.I>=27

ASTM 4589

Copper Corrosion

120°C 168hrs,no corrosion

ASTM D 2671

Cold bend

-40°C,4hrs,no cracking

ASTM D 2671

Water absorption

23°C,14days<=1%

ISO 62


Product Dimensions(mm) HBM

Normal Size
(mm)
As Supplied Min. Inside 
Diameter
(mm)
After Recovered Max.Inside  Diameter
 (mm)
After recovered Min.Wall Thickness 
 (mm)
Applicable Busbar Dimensions
(mm)
Standard Packing
(m/roll)
25/10 
25
10
3.0
25x3
15
30/12 
30
12
3.0
35x4
15
40/16 
40
16
3.0
40x5
15
50/20 
50
20
3.0
50x5
15
65/25 
65
25
3.0
65x8
15
75/30 
75
30
3.0
75x8
15
85/35 
85
35
3.0
85x10
15
100/40 
100
40
3.0
100x10
15
120/50 
120
50
3.0
120x12
15
150/60 
150
60
3.0
150x15
15

Product Dimensions(mm) HBT

Normal Size(mm)

As Supplied Min.Inside Diameter

(mm)  

After Recovered

Max.Inside Diameter
(mm)
 

After Recovered

Min.Wall

 Thickness

(mm)

Applicable Busbar Dimension(mm) Standard Packing
(m/roll)

25/10

25

10

2.0

25x3
30
30/12
30
12
2.0
35x4
30

40/16

40

16

2.0

40x5
15

50/20

50

20

2.0

50x5
15

65/25

65

25

2.0

65x8
15

75/30

75

30

2.0

75x8
15

100/40

100

40

2.0

100x10
15









Copyright©Rigilindia 2002
This site is Designed By: maascomputers.com