Super Thin Wall Very Flexible Flame Retardant Polyolefin Tubing(H-4)
                         

Applications

Typically used where space saving is important.Offers the ability
to pack components more closely than is possible with standard
tubings.Cost effective choice for many commercial applications;
electrically insulates and protects in-line components,disconnect
terminals,and splices.Used for strain relief on high density
connectors.

Shrink ratio: 2:1

Opearting temperature range : -55°C to 125°C

Minimum shrink temperature: 90°C
Approvals  UL 224 125°C vw-1 300V   File No.E204071

                   CSA 125°C 150V OFT    File No.200801

Features/Benefits
. Very thin wall provides space savings and rapid shrinking.
. Low shrink temperature further reduces installation time and risk
  of damage to temperature sensitive components.
. Very flexible;does not easily wrinkle when bent.

 

Specification values


Property

     Method of test

       Value

      Temperature at continuous duty
      IEC 216
     -55 to +125oc

      Tensile strength

     ASTM D 638

        >14MPa

      Elongation at break

     ASTM D 638

        >400%

      Longitudinal shrinkage

     -----

        0 5%

      Eccentricity

     ASTM D 2671

        <30%

      Elongation at break after aging

     158°C/168hrs

        >300%

      Flammability

   VW-1

         Pass

      Dielectric strength

     IEC 243

        >20KV/mm

      Volume resistance

     IEC 93

        >1014 .cm

      Copper stability

     ASTM D 2671

         Pass

      Water absorption

     ISO 62

         <0.15%

      Resistance to fungus and decay

     ISO 846

       Non-Promoting

      Resistance to solvents

     ISO 846

         Pass


Product dimensions(mm)

Normal Size(mm)

As Supplied(mm)

After Recovery(mm)

Standard

length(m/spool)
Inside Diameter

Wall
Thickness(normal)

Inside
Diameter
(max.)

Wall
Thickness
(min.)

1.0

1.4 ± 0.2

0.10

0.50

0.20

200

1.5

1.9 ± 0.2

0.10

0.75

0.20

200

2.0

2.5 ± 0.2

0.10

1.00

0.20

200

2.5

3.0 ± 0.2

0.15

1.25

0.25

200

3.0

3.5 ± 0.3

0.15

1.50

0.25

200

3.5

4.0 ± 0.3

0.15

1.75

0.25

200

4.0

4.5 ± 0.3

0.15

2.00

0.25

200

5.0

5.5 ± 0.3

0.15

2.50

0.28

100

6.0

6.5 ± 0.4

0.15

3.00

0.28

100

7.0

7.5 ± 0.4

0.15

3.50

0.28

100

8.0

8.5 ± 0.4

0.15

4.00

0.28

100

9.0

9.5 ± 0.4

0.15

4.50

0.28

50

10 

10.5 ± 0.4

0.15

5.00

0.28

50

11 

11.5 ± 0.4

0.15

5.50

0.28

50

12 

12.5 ± 0.4

0.15

6.00

0.28

50

13 

13.5 ± 0.4

0.15

6.50

0.28

50

14 

14.5 ± 0.4

0.15

7.00

0.28

50

15 

15.5 ± 0.4

0.15

7.50

0.28

50









Copyright©Rigilindia 2002
This site is Designed By: prolepticsystems.com
Ordering Information
Colour   Black,white,blue,yellow,green,grey,red
  Other colours available on request
Size selection    Always order the largest that will shrink snugly over the component to be    covered.Special order sizes are available on request.
Standard Packaging    On Spools
Marking    Marked with UL/CSA/-F-legends
Ordering Description    Specify Product name,Size and colour