Applications
The
tubing manufactured with specially developed technology used
where international standards require positive identification of ground,
the flexible flame retardant and permanent colour properties make it
easy to install and identify.
Shrink
ratio:
2:1
Mininmum
shrink temp:100°C
|
Properties |
Method of test
|
Typical value |
|
Operating
temperature |
IEC 216 |
-55°C |
|
Tensile
strength |
ASTM D 638 |
14Mpa |
|
Elongation
at break |
ASTM D 638 |
400% |
|
Longitudinal
shrinkage |
--------- |
0-5% |
|
Eccentricity
|
ASTM D 2761 |
20% |
|
Tensile
strength after aging Elongation at break after aging |
158°C |
350% |
|
14Mpa |
||
|
Flammability |
VW-1 |
Pass |
|
Dielectric
strength |
IEC 243 |
20KV/mm2 |
|
Volume
resistance |
IEC 93 |
1014 . cm |
|
Copper
stability |
ASTM D 2671 |
Pass |
|
Water
absorption |
ISO 62 |
0.5% |
|
Resistance
to fungus and decay |
ISO 846 |
Pass |
|
Normal size |
As Supplied Min. Inside Diameter (mm |
After Recovered Max.Inside Diameter (mm) |
After Recovered Min.Wall Thickness( mm ) |
|
2.0/1.0
|
2.0
|
1.0
|
0.44
|
|
3.0/1.5 |
3.0 |
1.5 |
0.44 |
|
5.0/2.5
|
5.0
|
2.5
|
0.50
|
|
6.0/3.0 |
6.0 |
3.0 |
0.50 |
|
7.0/3.5
|
7.0
|
3.5
|
0.56
|
|
8.0/4.0 |
8.0 |
4.0 |
0.56 |
|
10.0/5.0 |
10.0 |
5.0 |
0.56 |
|
12.0/6.0
|
12.0
|
6.0
|
0.56
|
|
13.0/6.5 |
13.0 |
6.5 |
0.56 |
|
16.0/8.0
|
16.0
|
8.0
|
0.69
|
|
20.0/10.0 |
20.0 |
10.0 |
0.89 |
|
25.0/12.5 |
25.0 |
12.5 |
0.89 |
|
40.0/20.0 |
40.0 |
20.0 |
1.10 |
 |
 |
|
|
|
|
 |
|
| |
|
Copyright©Rigilindia
2002
|
|
This site is Designed
By:
prolepticsystems.com
|
 |
|
